800.560.6222
MVSupply Links:
Manabloc Fittings & Accessories
MVSupply has one of the most complete in-stock selections of Pex crimp fittings in the country, and all at discount prices!
Here is a general overview of the most common fittings used in a typical Manabloc Installation (click on part number links for additional information or to order online):
Manabloc Main Supply Fittings
Std. Manablocs have (3) main supply inlet/outlet ports that can be configured two different ways:
1.
Cold Supply Inlet
connected to main; Hot Supply Inlet connected from water heater; Cold Outlet
capped. Water heater cold supply is
branched from main before the Manabloc.
2.
Cold Supply Inlet connected to
main; Hot Supply Inlet connected from water heater; Cold Outlet connected to
water heater cold supply. Water
heater cold supply is fed from Manabloc cold outlet.
MXSA4 - 3/4" crimp x Manabloc - Used to connect 3/4" Pex (crimp) to one of the main inlet/outlet ports on the Manabloc for main water supply. Requires 3/4" Pex supply line.
MXSA5 - 1" crimp x Manabloc - Same as MXSA4 except larger size for 1" Pex (crimp).
MSA45 - 3/4" MPT x Manabloc - 3/4" MPT fitting installs on the main inlet/outlet ports on the Manabloc for main water supply. Requires supply line with 3/4" FPT fitting.
MSA55 - 1" MPT x Manabloc - Same as MXSA45 except larger size (1" MPT).
ECAP1 - Manabloc main inlet/outlet port cap - Install on a Manabloc inlet/outlet port to cap an unused supply port.
MXSC45 - 3/4" Compression (7/8" OD) x Manabloc - 3/4" compression fitting installs on the main inlet/outlet ports on the Manabloc for main water supply. Requires SDR9 Pex, CPVC or copper supply line (7/8" OD).
Manabloc Fixture Supply Port Fittings
MXLSA23 - 3/8" crimp x 3/8" port Manabloc adapter - used to crimp 3/8" Pex to 3/8" Manabloc ports.
MXLCD24 - 3/8" crimp x 1/2" port Manabloc adapter - used to crimp 3/8" Pex to 1/2" Manabloc ports.
MXLSA33 - 1/2" crimp x 3/8" port Manabloc adapter - used to crimp 1/2" Pex to 3/8" Manabloc ports.
MXLCD34 - 1/2" crimp x 1/2" port Manabloc adapter - used to crimp 1/2" Pex to 1/2" Manabloc ports.
MVSRX2 - 4- Piece compression fitting to connect 3/8" Pex to a 3/8" Manabloc fixture port.
MVSRX3 - 4- Piece compression fitting to connect 1/2" Pex to a 1/2" Manabloc fixture port.
RXPC3 - Safety Cap - used to seal and protect unused 3/8" Manabloc ports (also used as a test cap for std 1/2" threaded nipples).
RXPC4 - Safety Cap - used to seal and protect unused 1/2" Manabloc ports (also used as a test cap for std 3/4" threaded nipples).
Fixture Fittings
Tub/Shower Fittings
XLDE23C - 3/8" crimp x 1/2" FPT Drop-Ear Elbow (copper) - Used in tub & showers to install tub spouts and showerheads. Two "ears" (with screw holes) provide sub-wall mount for showerheads and tub spouts.
XLDE33 - 1/2" crimp x 1/2" FPT Drop-Ear Elbow - Used in tub/showers to install tub spouts and showerheads. The three brass "ears" (with screw holes) provide a very secure sub-wall mount for showerheads and tub spouts.
XLC22M/21F - 3/8" crimp x 3/8" sweat (male) - used in concealed locations to connect 3/8" Pex to fixtures with 3/8" sweat (female) connections.
XLC23M/22F - 3/8" crimp x 1/2" sweat (male) or 3/8" sweat (female) - used in concealed locations to connect 3/8" Pex to fixtures with 1/2" sweat (female) or 3/8" sweat (male) connections (combination fitting).
XLC33M - 1/2" crimp x 1/2" sweat (male) - used in concealed locations to connect 1/2" Pex to fixtures with 1/2" sweat (female) connections.
XLC33F - 1/2" crimp x 1/2" sweat (female) - used in concealed locations to connect 1/2" Pex to fixtures with 1/2" sweat (male) connections.
XLMC23 - 3/8" crimp x 1/2" MPT - used in concealed locations to connect 3/8" Pex to fixtures with 1/2" FPT.
XLMC33 - 1/2" crimp x 1/2" MPT - used in concealed locations to connect 1/2" Pex to fixtures with 1/2" FPT (tub/shower valves, hose bibs, etc.)
Washer, Ice-maker & Hose Bib Fittings
XLFC23 - .3/8" crimp x 1/2" FPT - used in concealed locations to connect 3/8" Pex to low-flow hose bibs.
XLFC33 - .1/2" crimp x 1/2" FPT - used in concealed locations to connect 1/2" Pex to standard hose bibs (MVSFFHB08VB, MVSFFHB10VB, MVSFFHB12VB).
XLSA23B - .3/8" crimp x 1/2" FPT - used to connect 3/8" Pex to fixtures with 1/2" MPT. Connects to std icemaker and washer rough-in boxes (MVSICEBX or MVSWASHBX).
XLSA33B - .1/2" crimp x 1/2" FPT - used to connect 1/2" Pex to fixtures with 1/2" MPT. Connects to std icemaker and washer rough-in boxes (MVSICEBX, MVSWASHBX).
Lavatory Fittings
XLSA23 - 3/8" crimp x Lav. - used to connect 3/8" Pex to lavatory and sink fixtures. Allows removal of fitting without re-crimping. (bath. lav, kit. sink, util. sink, etc.).
XLSA23B - 3/8" crimp x Lav. - 1/2" crimp x Lav. - same as XLSA23 except with brass swivel nut instead of plastic (recommended for MVS icemaker and washer rough-in boxes).
XLSA33 - 1/2" crimp x Lav. - used to connect 1/2" Pex to lavatory and sink fixtures. Allows removal of fitting without re-crimping. (bath. lav, kit. sink, util. sink, etc.).
XLSA33B - 1/2" crimp x Lav. - same as XLSA33 except with brass swivel nut instead of plastic (recommended for MVS icemaker and washer rough-in boxes).
VXVL23 - Polymer Valve, 3/8" crimp x Lav. - used to connect 3/8" Pex to lavatory and sink fixtures. Allows removal of valve without re-crimping.
Dishwasher Fittings
XCME22 - 3/8" compression x 3/8" MPT elbow - Compression fitting used for 3/8" Pex dishwasher supply.
XCME32 - 1/2" compression x 3/8" MPT elbow - Compression fitting used for 1/2" Pex dishwasher supply.
Closet Fittings
XLCSA23 - 3/8" crimp x closet - used to connect 3/8" Pex to toilets. Allows removal of fitting without re-crimping.
VXVC2 - Polymer Valve, 3/8" crimp x closet - used to connect 3/8" Pex to toilets. Allows removal of valve without re-crimping.
XLCSA33 - 1/2" crimp x closet - used to connect 1/2" Pex to toilets. Allows removal of fitting without re-crimping.
VXVC3 - Polymer Valve, 1/2" crimp x closet - used to connect 3/8" Pex to toilets. Allows removal of valve without re-crimping.
Water Heater Fittings
XLSE4418 - Water Heater 18" flex connector (copper) x 3/4" crimp (swivel ends). Provides the code required 18" between Pex tubing and a water heater. Includes swivel end nut for simple installation or removal.
Accessories / Installation Supplies
Manabloc Valve Stem Replacement Kit
MBRS4 - Manabloc Valve Stem Replacement Kit - used to repair/replace Manabloc supply line valves.
Manabloc T-Handle
MBS136 - Replacement Manabloc T-Handle (black, small stem) - used to open/close Manabloc supply line valves on older Manablocs manufactured prior to Jan 2004.
MBS136R - Replacement Manabloc T-Handle (red, large stem) - used to open/close Manabloc supply line valves on new Manablocs manufactured since Jan 2004.
Manabloc Wrench
MW1 - Manabloc Wrench - used to tighten Manabloc supply port nuts (without skinning your knuckles).
Mounting Bracket kit
MBB2 - Mounting bracket kit for all Manablocs
Turn-out Clamps / Copper Stub-outs
CLSE23 - Plastic turn-out elbow/clamp for 3/8" tubing. Used to rough-in 3/8" supply lines in stud-walls.
XLE23SOE - 3/8" crimp x 1/2" copper stub-out (with mounting flange) - used when installing chrome angle stops (XCVAC31or MVSCVAC31) and Pex or braided stainless steel supply risers (RLX120, RKX120, MVSKS112 or MVSLS120) to lav, closet or kit sink fixtures.
XLE33SOE6 - 1/2" crimp x 1/2" copper stub-out (with mounting flange) - used when installing chrome angle stops (XCVAC31or MVSCVAC31) and Pex or braided stainless steel supply risers (RLX120, RKX120, MVSKS112 or MVSLS120) to lav, closet or kit sink fixtures.
Tubing bundling ties
HB14120 - Heavy-Duty 14" nylon zip tie to bundle tubing at the Manabloc.
Test Plugs / Test Caps
RXPC3 - 1/2" FPT test cap - used to cap 1/2" threaded showerhead and tub spout pipe nipples when pressure testing plumbing system.
VXP2 - 3/8" Plastic test plugs (crimp) for pressure testing system. Also used to keep dirt and debris out of tubing during installation. Also available for 1/2" (VXP3) and 3/4" (VXP4) tubing.
Escutcheons
RXEW2 - White plastic escutcheon (decorative flange) for 3/8" tubing. Also available for 1/2" tubing (RXEW3).
RXEW2D - White plastic escutcheon (decorative flange) for 3/8" tubing has 2 holes for both hot and cold supply lines. Also available for 1/2" tubing (RXEW3D).
Manapanel Access Panels
MANAPANEL - Manabloc Access Panel - Decorative cover, used when the Manabloc is mounted in a finished area.
Manabloc Oops Kits
MVSPOK23 Manabloc Oops Kit for std Manabloc Packages (3/8" & 1/2") contains an assortment of the most common fittings, couplers and crimp rings required for typical Manabloc installations, "just-in-case", including: (1) XLMC33, (1) XLFC33, (1) XLFC23, (1) XLSA23, (1) MXLSA24, (1) RXPC3, (2) XLC22, (2) XLC33, (2) XLC32, (10) XLCR2 & (10) XLCR3. Also available for 1/2" only Manabloc Packages (MVS0K3).
MVSOK23D Deluxe Oops Kit for std Manabloc Packages (3/8" & 1/2") includes std. Oops Kit (contents listed above) plus (1) MBRS3 Manabloc Valve Stem Replacement Kit; (1) MBS136R Manabloc T-Handle Valve Key; (1) XLE33, (1) XLC33F, (1) XLC33M; (1) MBPC4; (1) XLT333; (1) XLE22, and (1) XLT222. Also available for 1/2" only Manabloc Packages (MVS0K3D).
Pressure Test Kit
MVSPTKML3 Manabloc Pressure Test Kit - includes air valve w/cap, 100 PSI air gauge (2.5") and fittings with Manabloc port adapter for pressure testing Manabloc system. Alao available with 3/8" Manabloc Port adapter (MVSPTKL2).
Manabloc Packages (Combination)