Manabloc Whole-House Packages (Manabloc Forward)
Free Shipping on all Manabloc Packages!
Manabloc packages contain everything needed for a typical 'Manabloc forward' installation except for crimp tools.
MVSP Series Manabloc Packages include both 1/2" and 3/8" Pex tubing for maximum efficiency (less water waste and lower energy cost). ViegaPex tubing connects directly to each fixture from the Manabloc without splices or couplings (less chance for leaks with less connections). For the concealed connections (tub/shower, washer supply, icemaker supply, hose bibs), Pex tubing connects directly to the fixture with crimp threaded adapters (drop-ear elbows are included for tub spouts and showerheads). For the exposed connections (kit. sink, lav's, toilets) CLSE23 turn-outs are used to secure the tubing at the stud wall allowing the Pex tubing to connect directly to the fixture with a crimp swivel connector (allows fixture installation or replacement after the crimp is made). The dishwasher fitting is an angled compression threaded adapter (to allow dishwasher installation or replacement). Shut-off valves for all supply lines are built into the Manabloc... if you'd like to add in-line stops, or shut-off's at the Kit., Lav., or toilet, see Additional Components and Manabloc Package Upgrades at bottom of page.
1/2" ViegaPex lines are used for the high-flow fixtures (hose bibs and tub/showers) and 3/8" ViegaPex lines for all other fixtures (see detailed component list below). The discounted packages include fixture fittings for (1) lavatory, (1) toilet and (1) tub/shower per full bath and (1) lavatory and (1) toilet per half bath. They also include fittings for (1) kitchen sink, (1) washer supply, H & C (for a std. washer rough-in-box w/1/2" threads), (1) dishwasher supply, (1) icemaker supply (for a std. icemaker rough-in-box w/1/2" threads), and (2) hose bibs. Packages also include a MW1 Manabloc wrench and an "Oops Kit" with extra fittings, couplers and crimp rings "just-in-case"! And to complete the installation, all packages include a MBB2 Manabloc mounting bracket kit, J-Clamps, Pex bend supports, escutcheons, RXPC4 safety caps (for unused Manabloc ports), crimp rings, and both test plugs and test caps to pressure test the system (pressure test kit is NOT included, but available, see below). Please Note: Tubing quantities in the packages are based on 25' average fixture supply line length, order additional Pex tubing if you need more for your project. See Manabloc Package Upgrades and Additional Components at bottom of page. Email us at email@example.com if you have any questions.
Rather have a Manabloc package with 1/2" tubing only? Click here
Need more information about Manabloc fittings? Try this: Manabloc Fittings & Accessories
Don't forget to protect your new plumbing system investment with a Honeywell Water Sediment Filter! Click here for details
Purchase a discounted Manabloc Package Now, or use the package contents list (below) to configure your system. 3/8" and 1/2" crimp tools required for installation. (click on sale price to add to basket):
1 Bath Manabloc Package (MVSP-10) Click for sale Price
1-1/2 Bath Manabloc Package (MVSP-15) Click for sale Price
2 Bath Manabloc Package (MVSP-20) Click for sale Price
2-1/2 Bath Manabloc Package (MVSP-25) Click for sale Price
3 Bath Manabloc Package (MVSP-30) Click for sale Price
3-1/2 Bath Manabloc Package (MVSP-35) Click for sale Price
4 Bath Manabloc Package (MVSP-40) Click for sale Price
The order numbers are MVSP-XX (the "XX" is the number of bathrooms, for example: MVSP-25 is a package for a 2.5 bathroom house.)
|MXBDxx-3cus||MANABLOC (1/2" Ports, Bare)||14 Port||18 Port||24 Port||24 Port||24 Port||30 Port||30 Port|
|MBB2||Mounting Bracket Kit||1||1||1||1||1||1||1|
|PXR2C||3/8" PEX, Red||100'||200'||200'||200'||200'||200'||200'|
|PXB2C||3/8" PEX, Blue||200'||200'||200'||300'||300'||300'||300'|
|PXR3C||1/2" PEX, Red||100'||100'||100'||100'||100'||100'||100'|
|PXB3C||1/2" PEX, Blue||100'||100'||100'||100'||200'||200'||200'|
|MSA45||3/4" MPT x MANABLOC||2||2||2||2||2||2||2|
|ECAP1||MANABLOC End Cap||1||1||1||1||1||1||1|
|RXPC4||1/2" MANABLOC Port Safety Cap||1||2||6||3||1||4||2|
|XLDE33||1/2" INS Drop Ear Elbow||2||2||4||4||6||6||8|
|XLMC33||1/2" INS x 1/2" MPT (tub/shower)||4||4||8||8||12||12||16|
|XLFC33||1/2" INS x 1/2" FPT (hose bibs)||2||2||2||2||2||2||2|
|XLSA23||3/8" INS x LAV (washer/icemaker)||3||3||3||3||3||3||3|
|CLSE23||Turn-out Clamp (sinks/toilets)||5||8||8||11||11||14||14|
|XRSA23||3/8" INS x LAV (sinks)||4||6||6||8||8||10||10|
|XLME22||3/8" INS x 3/8" MPT Elbow (Dish.)||1||1||1||1||1||1||1|
|XLCSA23||3/8" INS x Closet (toilets)||1||2||2||3||3||4||4|
|MXRDC24/34||3/8" & 1/2" Port Adapters (total)||13||16||18||21||23||26||28|
|RXPC3||1/2" FPT Test Cap (tub/shower nipples)||2||2||4||4||6||6||8|
|HB14120MV10||14" Nylon Tie||10||10||10||10||10||10||10|
|CLJ2||3/8" PEX Tubing Clamp||75||100||100||125||125||150||150|
|CLJ3||1/2" PEX Tubing Clamp||50||50||50||50||75||75||100|
|VXP2MV10||3/8" Pex Tubing Test Plug||10||10||20||20||20||20||20|
|PLBS2||3/8" Pex Bend Support||6||8||8||10||10||10||10|
|PLBS3||1/2" Pex Bend Support||4||4||4||6||6||6||6|
|XLCR2||3/8" Crimp Ring||25||50||50||50||50||75||75|
|XLCR3||1/2" Crimp Ring||25||25||25||25||25||50||50|
|MVSOK23****||Manabloc Oops Kit||1||1||1||1||1||1||1|
**** MVSOK23 Manabloc Oops Kit Includes: (1) XLMC33 (or XLMC23), (1) XLFC33 (or XLFC23), (1) XRSA23, (1) MXRDC24, (1) XLC22, (1) XLC33, (1) XLC32, (5) XLCR2 & (5) XLCR3. Please Note: Manabloc Oops Kit contents may vary. Also available separately, MVSOK23, List $17.61, Sale $13.89
Free Std. Ground Shipping on all Manabloc Packages (lower 48 only)!
Manabloc Package Upgrades:
Manabloc Port Upgrades include a larger Manabloc for future expansion and are available for all Manabloc packages. Upgrade must be purchased on the same order as the Manabloc Package. Multiple Port Upgrades may be purchased. Port upgrades do NOT include any fittings. Please make sure to order the correct port upgrade for the Manabloc package you are ordering (refer to the table above to see which Manabloc is included with the Manabloc packages).
Example 1) The MVSP-15 package includes an 18 port Manabloc. To upgrade that 18 port Manabloc to a 24 port Manabloc, order the MXBD18-24(upgrade). Or to upgrade that 18 port Manabloc to a 30 port Manabloc, order BOTH the MXBD18-24(upgrade) AND the MXBD24-30(upgrade).
Example 2) The MVSP-30 package includes a 24 port Manabloc. To upgrade that 24 port Manabloc to a 30 port Manabloc, order the MXBD24-30(upgrade). Or to upgrade that 24 port Manabloc to a 36 Port Manabloc, order BOTH the MXBD24-30(upgrade) AND the MXBD30-36(upgrade).
If you have ANY questions about the Manabloc port upgrades, please call or email for clarification before placing your order!
14 to 18 Port Upgrade MXBD14-18(upgrade), Click for Sale Price
18 to 24 Port Upgrade MXBD18-24(upgrade), Click for Sale Price
24 to 30 Port Upgrade MXBD24-30(upgrade), Click for Sale Price
30 to 36 Port Upgrade MXBD30-36(upgrade), Click for Sale Price
3/4" Manabloc Main Supply Package Upgrades (MVSP4-033(upgrade), List $177.07, Sale $120.27; MVSP4-100(upgrade), List $221.50, Sale $155.27) includes 3/4" main supply tubing and fittings between the pressure regulator, Manabloc and water heater: (1) 3/4" ViegaPex white tubing, (1) XLMC44 - 3/4" Crimp x 3/4" MPT adapter (Connect Pex to regulator); (3) MXRSA4 - 3/4" Crimp x Manabloc Fitting (replaces Manabloc pkg. fittings ECAP1 and MSA45); (3) XLV44KITth - 3/4" Crimp ball valve kits (main shut-off and H/C water heater valves); (2) MVS4418SS4 -18" 18" Braided SS Flex water heater connectors (w/swivel connect); (5) XLE44 - 3/4"Elbows; (1) XLCR4MV025 - 3/4"Crimp Rings, 25 Pk.; & (1) CLJ4MV025 - 3/4"J-Clamps. 3/4" crimp tool required for installation. Click on sale price to go to product detail page.
Manabloc 1" MPT Main Supply Line Fitting Upgrade (MSA55(upgrade), List $16.40, Sale $11.00 ) includes (2) MSA55 1" MPT Manabloc Main Supply Line Fittings (instead of the (2) MSA45 3/4" fittings included in Manabloc whole house packages). Click on sale price to add to basket.
Deluxe Oops Kit Upgrade (MVSOK23D(upgrade), List $20.91, Sale $17.99) includes (1) MBRS5 Manabloc Valve Stem Replacement Kit w/(1) MBS136R Manabloc T-Handle Valve Key; (1) XLE33, (1) XLC33F, (1) XLC33M; (1) RXPC4; (1) XLT333; (1) XLE22, and (1) XLT222. Click on sale price to add to basket.
Chrome Angle Stop Upgrade includes Copper stub-outs, Chrome Angle Stops, Pex Risers and 1/2" escutcheons for the look of conventional finish plumbing for closet, Lav. and Kit. sink fixtures (replaces CLSE23 turn-out clamps, XLSA23 Lav fittings, XLCSA23 closet fittings and RXEW2 3/8" escutcheons included in std Manabloc packages).
CAS w/Braided SS Risers Upgrades include Braided Stainless Steel Risers (replaces the Pex risers in the std. CAS upgrade). Upgrade must be purchased on same order as Manabloc Package purchase. Click on sale price to add to basket.
1 Bath Chrome Angle Stop Upgrade MVSP-10CAS(upgrade), List $57.77, Sale $51.79
1 Bath CAS w/Braided SS Risers Upgrade MVSP-10CASBRSS(upgrade), List $101.57, Sale $85.52
1-1/2 Bath Chrome Angle Stop Upgrade MVSP-15CAS(upgrade), List $92.24, Sale $82.68
1-1/2 Bath CAS w/Braided SS Risers Upgrade MVSP-15CASBRSS(upgrade), List $161.92, Sale $136.20
2 Bath Chrome Angle Stop Upgrade MVSP-20CAS(upgrade), List $92.24, Sale $82.68
2 Bath CAS w/Braided SS Risers Upgrade MVSP-20CASBRSS(upgrade), List $161.92, Sale $136.20
2-1/2 Bath Chrome Angle Stop Upgrade MVSP-25CAS(upgrade), List $126.71, Sale $113.57
2-1/2 Bath CAS w/Braided SS Risers Upgrade MVSP-25CASBRSS(upgrade), List $222.27, Sale $186.88
3 Bath Chrome Angle Stop Upgrade MVSP-30CAS(upgrade), List $126.71, Sale $113.57
3 Bath CAS w/Braided SS Risers Upgrade MVSP-30CASBRSS(upgrade), List $222.27, Sale $186.88
3-1/2 Bath Chrome Angle Stop Upgrade MVSP-35CAS(upgrade), List $161.18, Sale $144.46
3-1/2 Bath CAS w/Braided SS Risers Upgrade MVSP-35CASBRSS(upgrade), List $282.62, Sale $237.56
4 Bath Chrome Angle Stop Upgrade MVSP-40CAS(upgrade), List $161.18, Sale $144.46
4 Bath CAS w/Braided SS Risers Upgrade MVSP-40CASBRSS(upgrade), List $282.62, Sale $237.56
Pressure Test Kit - (MVSPTKL3) includes air valve w/cap, 100 PSI air gauge (2") and fittings with 1/2" Manabloc port adapter for pressure testing Manabloc system.
Extra Standard Sink Fittings for MVSP Manabloc Pkgs. - (MVSP-XLAV) Includes the components required to connect additional sink fixtures to MVSP-xx Manabloc packages (utility sink, 2nd Lav in master bath, etc.) Includes (2) 3/8" port adapters, (2) CLSE23 turn-out clamps, (2) XRSA23 3/8" crimp x 1/2" Lav fittings (swivel), (4) XLCR2 crimp rings and (2) RXEW2 escutcheons. Requires (2) unused Manabloc ports (may need to upgrade to a larger Manabloc).
Extra CASBrSS Sink Fittings for MVSP Manabloc Pkgs. (with chrome angle stops and stainless steel braided risers) - (MVSP-XLAVSS) Includes the components required to connect additional sink fixtures to MVSP-xx Manabloc packages (utility sink, 2nd Lav in master bath, etc.) Includes (2) 3/8" port adapters, (2) XLE23SOE copper stub-outs, (2) MVSCVAC31 chrome angle stops, (2) MVSLS120 SS Braided risers, (4) XLCR2 crimp rings and (2) RXEW3 escutcheons. Requires (2) unused Manabloc ports (may need to upgrade to a larger Manabloc).
Lavatory Straight Stop - (VXVL23) 3/8" crimp polymer shut-off valve connects directly to lavatory and kitchen sink fixtures. Swivel connector allows installation or replacement after crimp is made.
Closet Straight Stop - (VXVC2) 3/8" crimp polymer shut-off valve connects directly to closet fixtures (toilets). Swivel connector allows installation or replacement after crimp is made.
Icemaker Rough-In Box w/Valve - (MVSICEBX) White plastic icemaker rough-in box, includes 1/8" MPT, 1/4 turn icemaker valve.
Washer Rough-In Box w/Valves - (MVSWASHBX) White plastic washer rough-in box, includes hot and cold 1/4 turn valves.
3/8" Brass Ball Valve - (XLV22) 3/8" crimp x 3/8" crimp brass straight ball valve. In-line stop for 3/8" Pex tubing supply lines.
1/2" Brass Ball Valve - (XLV33) 1/2" crimp x 1/2" crimp brass straight ball valve. In-line stop for 1/2" Pex tubing supply lines.
Need help custom designing your Radiant Floor Heat or Manabloc Plumbing System? Call us at 800.560.6222 (9am-4pm Monday-Friday, Eastern) or email firstname.lastname@example.org (days, evenings and weekends) and we'll help!
Please Note: MVSP Series Manabloc Packages require crimp tools. Even though Manabloc systems are very easy to install, we recommend installation by licensed, experienced plumbers.
MVSupply.biz is a "no-nonsense" company focused on delivering the highest professional- quality products at the lowest price. We combine incredibly low prices and Free Std. Ground Shipping for the best value on the web! MVSupply.biz Tech-Reps have years of experience with HRH and Manabloc systems and are just an email away from answering your questions (usually within an hour or two, not days). Just email us at email@example.com.